Best way to get the AMS 2 kit to work

After following the assembly instructions we need to make a change to one stiff component, the OEM 4 way hub spring. The OEM spring is rated to being over 30lbs of force way more then what is needed.

Short distances are best with tpu. If you have long distances or lots of buffers (X1C & P1S performs the best with these kits) you will struggle more.

From our experimentation and from printing with over 121 color changes is cutting 2 full circle coils off from one side (You do not need to do this if you get the 4 to 1 tension kit). After that make sure the tension is set to 0 or backed out all the way and load in the TPU95A. Tell the machine that the material is "TPU for AMS".

To make sure everything is going to work right, go to the Bambu Slicer and check Allow black listed materials. After some testing and tuning you will be all set!